Packaging is an inevitable step in the entry of goods. Packaging products are inseparable from various packaging machinery. With the continuous development of society, people have higher requirements for the packaging of goods, and promote the continuous development of the packaging machinery industry. Therefore, packaging machinery plays an important role in the packaging industry. It provides the industry with the necessary technical support to complete the packaging process of the product. Although the output value of packaging machinery is not as large as the packaging materials in the entire packaging industry, it is not a consumable item, but it is an indispensable support for the modernization of the packaging industry. It provides advanced technical equipment for the packaging industry, guarantees the high quality, ** rate, multi-variety, low cost and high environmental protection of the packaged products, thus obtaining strong vitality and bringing huge social and economic benefits. Without modern packaging machinery, there is no modern packaging industry.The development of the packaging machinery market will present the following two points:First of all, the packaging machinery technology content is increasing. Some of China's existing packaged machinery products are not high in technical content, and many advanced technologies have been applied to packaging machinery in foreign countries, such as remote remote control technology (including monitoring), stepper motor technology, automatic flexible compensation technology, laser cutting technology, Information processing technology, etc. The packaging machinery market is increasingly monopolized. At present, in addition to steel belt balers, pneumatic balers and some small automatic balers, semi-automatic balers have certain scale and advantages, other packaging machinery is almost system and scale, especially some packaging production lines with large demand on the market. In the world packaging market, it is monopolized by several major packaging machinery companies (groups). Specialization in the production of packaged machinery parts. The international packaging industry attaches great importance to improving the compatibility of packaging machinery and the entire packaging system. Therefore, the specialization of packaging machinery parts production is an inevitable trend of development. Many parts are no longer produced by the packaging machinery factory, but by some general-purpose The standard parts factory produces, some special parts are produced by highly specialized manufacturers, and the truly famous packaging machinery factory will probably be the assembly plant. The product is developing towards multi-function and single, high-speed polarization. The ultimate role of packaging machinery is to increase production efficiency and product diversification.Secondly, the overall technology of China's packaging machinery still lags behind that of developed countries, but the market demand of China's packaging machinery has promoted the development of the baler industry and promoted the continuous innovation of production enterprises, changing the backward business philosophy and development thinking, so China's balers The future development of the industry is very optimistic. As long as enterprises can seize the opportunity, I believe that in the near future, China's baler industry will stand at the forefront of the world packaging industry.

Semi-automatic baler maintenance management1. The baler must be placed on a stable operating table. It should not be used in high humidity, dusty and vibrating environments, and the power plug should be in good contact.2, when taking the items should be handled gently, when the fuse is broken, it must be lightly pulled to avoid damage to the heating parts.3, pay attention to keep clean, the machine should be cleaned immediately when there is dirt, weekly thorough cleaning of the inside and outside of the machine should be carried out regularly, the power should be disconnected during cleaning, so that the bracket, roller, no vacancies in the machine, no deposits .4. It is strictly forbidden to directly wash the body with water to avoid damage.5. When not in use for a while, the heating plate should be turned off to cut the wire switch to avoid shortening the life of the machine due to long-term heating.6. If it is not used for a long time, the power plug should be pulled out; when it is found that the machine has parts falling off or missing, it should be reported to the development department or the maintenance department in time.

A baler is usually a packaging operation that directly fastens a single or several packages with ropes, steel strips, and plastic straps for transportation, storage, and handling. In the early 1960s, with the advent of polypropylene materials, polypropylene plastic strapping machines were successfully developed in foreign countries. In many fields, especially light industry, we developed a baler that tightens the tension and adjusts randomly to improve the automatic baler. Adaptability of bandwidth, package specifications, workbench height, and strapping capabilities.    A baler is usually a packaging operation that directly fastens a single or several packages with ropes, steel strips, and plastic straps for transportation, storage, and handling.    In the early 1960s, with the advent of polypropylene materials, polypropylene plastic strapping machines were successfully developed abroad. In many fields, especially in the light industry, steel strips were gradually replaced, which made the balers popular.    China's automatic baler began to develop in the mid-1980s. * It was first promoted in books, newspapers and periodicals distribution departments. It has developed rapidly in recent years and has been widely used in light industry, food, foreign trade, department stores, printing, medicine, and chemical industry. Posts and telecommunications, textiles and other industries.    At present, some manufacturers of balers have adopted the international standards and absorbed the advanced foreign technology features, and have greatly improved the standard level, design and manufacturing technology and product quality, such as the automatic unmanned baler of Yongchuang Machinery. In terms of quality, it has reached the advanced level of similar equipment in foreign countries. It can be automatically positioned, bundled and indexed to carry out cross-type and well-type pattern binding. It adopts microcomputer control and has realized automatic unbundling production line. The future development trend of the baler is extended to full automation, deficiencies and diversification.    The development trend of balers is mainly for the development of balers for various purposes, such as compression balers; the development of heavy-duty belts, polyester belts, etc. instead of steel strips; the development of foam belts and soft belts for desktop balers. Improve the automation degree of the single machine, after the package is fed from the conveying device, the baling machine can be automatically positioned, bundled, indexed, and tied in a cross shape, a well-shaped shape, etc.; the microcomputer control is used to realize an unmanned automatic strapping production line. The foreign automatic balers have been developed to the target of 40 channels/minute to 60 channels/minute; the development of balers with tightly adjusted tensions to improve the bandwidth, package specifications, table height, and strapping capabilities of the automatic balers Adaptability and so on.